A premium, installer-grade adhesive for the fast and permanent installation of solid vinyl tile and vinyl plank, luxury vinyl tile, vinyl stair treads, vinyl-backed carpet and carpet tile, and vinyl-backed resilient sheet flooring.
- Long working time
- Builds strength fast for less slippage and earlier traffic
- Can be used over “cutback” adhesive residue
- Outstanding plasticizer-migration resistance for long-term bond integrity
- Non-staining
- Moisture- and alkali-resistant
- Excellent dimensional stability
- Henry’s Best 10-Year Limited Warranty
Applications:
HENRY 422 Premium Vinyl-Backed Flooring Adhesive is used for fast and permanent installation of solid vinyl tile and vinyl plank, luxury vinyl tile, vinyl stair treads, vinyl-backed carpet and carpet tile, and vinyl-backed resilient sheet flooring. It can also be used for the installation of glass-encapsulated vinyl flooring in accordance with the flooring manufacturers recommendations.
Bonds To:
HENRY 422 Premium Vinyl-Backed Flooring Adhesive bonds to suspended A.P.A.-approved wood, underlayment board, cementitious underlayment, and dry concrete that is above, on, or below grade where there is less than 3 lb./sq. ft./24 hours as determined by the calcium chloride moisture test (ASTM-F-1869). NOTE: Not recommended for installation over soft, resilient floor coverings.
Trowel Recommendations
Porous surfaces
Sq-Notch
1/16” D x 1/16” W x 1/16” A
117-135 sq. ft./gal.
(13-15 sq. yd./gal.)
Non-porous surfaces
U-Notch
1/32” D x 1/16” W x 5/64” A
225-240 sq. ft./gal.
(25-27 sq. yd./gal.)
