A premium, high performance, clear thin-spread adhesive for the installation of VCT (vinyl composition tile) and asphalt tile.
- 24-hour working time
- Good initial grab
- Dries clear – chalk lines show through
- Can be used over “cutback” adhesive residue
- Moisture and alkali-resistant
- Excellent trowelability
- Solvent-free
- Anti-microbial protection
- Henry’s Best 10-Year Limited Warranty
Applications:
HENRY 430 ClearPro Clear Thin Spread Floor Tile Adhesive is a premium, installer-grade adhesive used in the installation of VCT (vinyl composition tile) and asphalt tile.
Bonds To:
HENRY 430 ClearPro Clear Thin Spread Floor Tile Adhesive bonds VCT and asphalt tile to concrete, existing asphalt “cutback: adhesive residue that is smooth with no ridges or puddles evident, wood and wood underlayments (wood subfloors should be suspended), existing well-bonded resilient flooring (not perimeter-bonded or cushion-backed), ceramic tile, terrazzo, marble, polymeric poured floors, properly-mixed and applied powder underlayments and embossing levelers, primed poured-in-place gypsum subfloors, and radiant-heated subfloors where the surface temperature does not exceed 85°F (29°C).
Trowel Recommendation:
U-Notch
1/32” D x 1/16” W x 5/64” A
300-350 sq. ft./gal.
(33-39 sq. yd./gal.)
Warranty:
W.W. Henry Company warrants that HENRY 430 will not break down or lose its cohesive strength due to manufacturing or formulation defect for 10 years from the date of installation, if used for its stated purpose and applied in accordance with the instructions, subject to certain exclusions and limitations set forth in the warranty.
