A premium, installer-grade high-performance wet-set adhesive for installing rubber and vinyl cove base.
- Aggressive initial grab prevents slip during installation
- No open time required
- Plasticizer migration-resistant for installing vinyl cove base
- Easy cleanup with water
- Excellent trowelability
Applications:
HENRY 440 Cove Base Adhesive is a premium, installer-grade high-performance wet-set adhesive used for the installation of rubber and vinyl cove base.
Bonds To:
HENRY 440 Cove Base Adhesive bonds rubber and vinyl cove base to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal surfaces on all grade levels as recommended by the cove base manufacturer.
Trowel Recommendations:
Sawtooth Trowel
1/8” D x 1/8” W x 1/8” A
2-1/2” Cove Base – 310-340 sq. ft./gal.
4” Cove Base – 220-240 sq. ft./gal.
6” Cove Base – 165-180 sq. ft./gal.
Bead (1/8” bead)
4” Rubber or Vinyl Cove Base – 27 lin. ft./11 oz. cartridge
90 lin. ft./30 oz. cartridge
Warranty:
The W.W. Henry Company warrants that HENRY 440 will not break down or lose its cohesive strength due to manufacturing or formulation defects for 10 years, subject to certain exclusions and limitations set forth in the warranty, if used for its stated purpose and applied in accordance with the stated instructions.
