1.866.634.1189
Mannington High Gloss MHS 22 Urethane Sealer Kit

More Views

Mannington High Gloss MHS 22 Urethane Sealer Kit

Store SKU # 41-22

Be the first to review this product

In stock

Price: $26.15
Ships FREE on orders over $75.
Add Items to Cart

Quick Overview

MHS 22 sealer (two-part seam sealer) is designed for Mannington products with high-gloss urethane-based wearlayers.

MHS 22 sealer (two-part seam sealer) is designed for Mannington products with high-gloss urethane-based wearlayers. There is no substitute sealer available. A properly sealed seam will be as strong as the surface of the floor covering, and will remain intact for the life of the floor. The new Versatile Sealing Tip (VST-96) is included in this kit.

Directions:
Prior to sealing, be certain all seams are clean, dr y, and free of adhesive contamination.

Empty entire contents of Parts A and B into the supplied applicator bottle. After securing the VST tip to the applicator bottle, gently shake the bottle to mix the ingredients. Allow the bottle to stand until all air bubbles have dispersed, typically 15 minutes.

Prior to use, check the flow of the sealer on a scrap piece of flooring.

Use the forefinger of one hand on top of the flat portion of the tip to guide and ensure proper fin penetration. Use the other hand to control sealer flow. Hold the bottle at approximately a 45° angle.

Lightly squeeze the bottle to apply a uniform bead of sealer approximately 1/8" wide centered on the seam cut.

It is crucial that the seam sealer penetrate the full thickness of the seam cut to ensure a proper chemical weld.

Allow the sealed seam to dry before traffic is allowed on the floor. Do not walk on or move heavy furniture directly over the sealer until it is fully dry. We recommend 24 hours. Mark the seam by placing a scrap piece of flooring along each side of the seam.

MHS 22 cannot be saved for reuse. Safely discard any unused sealer.

Coverage:
One kit of MHS 22 will seal approximately 70 lineal feet of seams.

Precautions:
* Flammable liquid. Do not use near heat, sparks, pilot lights, fire, or other open flames
* Do not ingest
* Avoid contact with skin and eyes
* Use in well-ventilated areas
* Avoid prolonged breathing of vapors
* Do not save for reuse
* KEEP OUT OF THE REACH OF CHILDREN



You may also be interested in the following product(s)