Merkrete Hydro Guard SP-1 is a fast-drying thin, load-bearing waterproof and crack isolation membrane composed of modified elastomeric copolymers. With excellent elongation, adhesion and high strength properties, Hydro Guard SP-1 provides a 100% waterproof membrane that limits the transfer of substrate cracks to the finished ceramic or stone tile surface. Hydro Guard SP-1 is installed in a liquid state and can be applied to practically any form or irregular shape forming a monolithic waterproof barrier.
Hydro Guard SP-1 is for use in commercial buildings, residential housing and other areas requiring positive waterproofing like pools, fountains, spas, hot tubs, kitchens, countertops, balconies, tub surrounds, shower stalls and pans, under terrazzo, quarry, ceramic and stone tile. This membrane can be installed over any sound substrate, vertically or horizontally, interior and exterior.
Advantages
- Low VOC
- Built-in antimicrobial for mold and mildew resistance at the substrate
- Water (flood) test after 4 - 6 hour cure (70° F, 50% R.H.)
- Thin section that does not interfere with elevations
- Bonds directly to metal, PVC, stainless steel and ABS drains
- Interior or exterior
- Adheres to all common surfaces
- Installs quickly, cures in 2 - 4 hours (70° F, 50% R.H.)
- Fast-drying, foot traffic in 2 - 4 hours
- Exceeds ANSI A118.10 and A118.12 membrane requirements
- Easy to use; can be applied by trowel, airless sprayer, paint brush and roller
- May be turned up for base flashing and applied to walls for wainscot or shower wall application
- Crack isolation up to 1/8"
You may also be interested in the following product(s)
Merit Pro 4 Wire 9" Standard Roller Frame
$0.89
|
Wooster RR661 Golden Flo 9" Roller Cover, 1/2" Nap
$2.55
|
Wooster R245 9" Adhesive Applicator Roller Cover, 1/8" Nap
$2.85
|
