Sentinel 747 Plus is a powerful, biodegradable formula designed to safely and effectively strip adhesives remaining after removing vinyl tile, sheet vinyl, indoor and outdoor carpeting and wood flooring. Sentinel 747 Plus is an environmentally friendly, low odor product that effectively removes a variety of adhesives without the use of methylene chloride, acetone, toluene and other harmful agents. Use Sentinel 747 Plus to remove the old adhesive from existing floors, and/or properly prepare the surface before laying a new floor and/or for clean-up after new floor installation.
Directions - Floor Tile Mastic Removal
Step One - If necessary, protect walls, drains, cracks and other flooring with an absorbent (rags, kitty litter, sawdust) to keep liquefied mastic contained.
Step Two - Wet the entire adhesive surface with 747. This may be done by using a sprayer or by mopping 747 over the surface of the mastic. Allow 747 to soak and penetrate for 10-20 minutes to saturate the mastic.
Step Three - Scrape or squeegee the bulk of the softened or liquefied mastic from the surface with a floor scraper (razor scraper) or floor squeegee.
Step Four - Wash and rinse the floor thoroughly with Sentinel 810 and water to ensure a clean surface. Allow to dry a minimum of 24 hours before installing new flooring.
Coverage for the mastic remover will range from 100-200 square feet per gallon.