Ardex VB 100 Fast-Track, One-Component Moisture Vapor Barrier

Key Features

• Reduces moisture vapor emissions in concrete to acceptable levels for floor coverings
• For RH readings up to 100%
• For absorbent concrete
• No minimum profile required
• No priming required prior to installation of ARDEX underlayments
• Fast drying – install ARDEX underlayments in as little as 60 minutes after applying the second coat
• One-component system
• Ready for use*, resealable and reusable
• Easy to use and apply
• Water-based, Zero VOC
• ASTM E96 < .1 perms

*As some settling can occur, stir the ARDEX VB 100 with a wooden paint stirrer or similar prior to use to ensure that all components that have settled are in full suspension. DO NOT MECHANICALLY MIX. DO NOT ADD WATER OR OTHER ADDITIVES!
 

Installation

• Coverage:
  • Approx. 1125 sq. ft. (27.6 sq. m) per unit at 2 coats
  • Approx. 225 sq. ft. per gal. (5.5 sq. m per L) at 2 coats (Will vary with concrete surface profile, porosity and texture)

Performance

• Effect of 14 pH Solution (ASTM D1308): No effect
• Walkable: When completely dry (approx. 60 minutes); no max. provided surface is protected
• Install Underlayment: 1 – 24 hours
• VOC: 0 g/L
• Packaging: 5 gal. (19 L) pail and 1 gal. pail
• Storage: Store in a cool, dry area. Do not leave containers exposed to sun. Keep from freezing. Keep away from heat.
• Shelf Life: 1 year, if unopened

Open containers remain usable for 6 weeks if sealed and stored under proper conditions. Keep container closed when not in use.