ProLeveling System PRSPC Red Protection Cup (50/Bag)

The ProLeveling System is a revolutionary tile leveling system that uses only two components, a leveler and a cap, to lay tile quickly and easily. The system works to virtually eliminate any spacing and lippage problems on both floor and wall tile installations. And unlike most other systems, these levelers can also be used as traditional spacers without needing a tensioning tool.

A complete range of levelers is available in cross, linear (straight) and T shapes with spacer widths of 1mm, 2mm, 3mm and 5mm to allow for leveling of tiles from 3mm (1/8") to 40mm (1-5/8") thick. The levelers each have a threaded pin there the tensioning cap should be hand tightened, leveling the tile.

There are also optional protection cups available for added protection against tile marking (particularly on soft marble, onyx and other soft tiles), as well as removal caps for quickly removing used levelers from tensioning caps using a drill.

• Using Levelers also as spacers:
  For Cross and T joints, use either a Cross or T Leveler, one per joint.
• Using Levelers with other spacers:
  For Cross and T joints, use three or four, respectively, Linear Levelers narrower than the spacer (grout joint) width at each joint.
• All installations:
  In addition to the above, it is recommended to also use one Linear Leveler evenly spaced between two Levelers that would otherwise be 18", or more, apart