tools4painting
Pinch to zoom
Tap for fullscreen
Hover to zoom
Click for fullscreen
D-Cut RC-200 Profile Wall Base Cutter
- SKU:
- 266140
In Stock
- 7 Available
$629.00
Specialty cutter for cutting Johnsonite Millwork and other popular rubber and vinyl wall base profiles. Safer than a saw blade with no dust, noise or electricity. Makes precise miter cuts for forming corners. Cut up to 8" wide and 7/8" thick for square cuts, 5/8" for bevel cuts.
This specialty cutter is designed for cutting Johnsonite Millwork and other popular vinyl and rubber wall base profiles without dust, noise or electricity. It makes precise miter cuts at 45, 22.5 and 90 angles to allow for perfectly formed corners.
- Designed for popular rubber and vinyl wall base profiles
- Use on Johnsonite Millwork, Roppe Contours, Flexco Base Sculptures, Burke Wall Base
- Cutting capacity is 8" wide, 7/8" height on straight cuts and 5/8" height on bevel cuts
- Make precise miter cuts at 45°, 22.5° and 90° angles for forming corners
- Equipped with long-lasting tungsten steel blade
- Safer than a saw blade with no dust, noise or electricity
- Weighs 19.8 lbs
| Free shipping | Yes |
|---|---|
| Brand | D-Cut |
| MPN | RC-200 |
| SKU | 266140 |
1,000s of ItemsAll in one place
Free ShippingOn Most Orders Over $75
US Based Support StaffReady to help, when you need us
Secure Payments100% Protected Transactions
Customer Reviews
Showing 1–8 out of 8 reviews
Great tool
I have put miles on this machine literally, I have only had to replace the blade a few times and that is it for part replacements in over 2 years. I have been the sole user of it and it has been treated well by me. The handle does tend to come a little loose after a long time of carrying it and regular use. This is easily tightened again. The wheels stick out and get stuck in a locked position when you try to roll it from one place to the other and it is easy to catch the corner of it on your knee. I would like to see a revision. I would like to see a handle extension that can be slid out for pushing/pulling it along. But most of all I would like to see some type of light added so that it was easier to see in dim lighting. Would be nice, may not be that easy or practical. Overall it has been a kick ass machine that has served me well and made me piles of money. Once you get the hang of this machine and do not abuse it you will be so grateful for it. Well worth the money.
Review by
Heather
Posted on
Quality:
5
Value:
5
Price:
4
Good until you use it.
My company has 8 of these and they work great, but require expensive repairs after not much use. We recently had a job with 16 miles of millwork, and had 4 cutters on site. Not one made it through. The axle wears on the side rotating face place and wears an oval into the sidewall. The loss of tolerance in parts results in chipped teeth on the gears, and sloppy cuts. A bearing in place of this metal to metal contact point would seemingly mitigate this problem. Also, they only sell assembly parts, so I can't buy the individual parts I need. The parts end up costing half the price of a new cutter. This same company makes an LVT Cutter with an oval design that pushes the blade down and hasn't worn out after years of heavy use. They are currently the only base cutter I can find.
Review by
Millwork Mike
Posted on
Quality:
1
Value:
3
Price:
4
Well worth the money
We bought a cutter for a huge millwork job we have. We had always used miter saws. Man, we had been doing it all wrong. This cutter eliminates a stationary workplace for cutting, and makes it able to make cuts as you go and not have to be up and down. And as most installers know this is what gets you as the day goes on. Cuts are as close to perfect as it gets. Not cleanup involved other than scrap pieces. No dust from saw cutting. Literally this cutter is worth its weight in gold.
Review by
Weiss Flooring
Posted on
Quality:
5
Value:
5
Price:
4
Super Handy
This is a great tool. Beats the heck out of a saw in most ways. The only problems I have found are some how a ham fisted coworker managed to break the gear on one side (not the tools fault I'm sure, @ 100 bucks to fix) and because we're working with flexible material the blade distorts the profile a bit requiring a little extra care on the outside corners (caulk.)
It is an expensive one trick pony but if you have a lot of millwork to install it's totally worth it.
It is an expensive one trick pony but if you have a lot of millwork to install it's totally worth it.
Review by
Robert
Posted on
Quality:
5
Value:
5
Price:
4
A must for Millwork Base
We are doing more and more Millwork, and this tool has increased my quality and production. Highly recommended.
Review by
Floorman
Posted on
Quality:
5
Value:
5
Price:
5
Saves time
Easy to use just gotta figure out the blade hits! No more noise, mess, and frustration! Go ahead and get it if you do miles of millwork base!
Review by
Adam L
Posted on
Quality:
5
Value:
5
Price:
4
Perfect
Perfect size, no noise, no dirt, better to carry miter saw
Review by
Papadoo
Posted on
Quality:
5
Value:
5
Price:
5
Tried it on the job today
So far, the guys love it, installed rubber millwork base. There is some learning, Its hard to know where the cut will actually cut, you are cutting the base from the face side, so you need to learn where to cut. Maybe some sort of mark on the bed to show where the blade will touch the back of the base. Saved countless trips out to the saw and cleanup for 300 lf was about 2 minutes. Seems to be well made.
Review by
Scott
Posted on
Quality:
4
Value:
4
Price:
4